Reman Howo NX 380 Dump Truck 12 Wheel

Chinese Reman Dump Trucks Description

• .Mining environments vary widely across different countries. Some sites haul dense heavy ore, others handle loose gravel, while some operate in muddy rainy regions.
• REMAN ROAD reman Howo 12 wheel tipper truck remanufacturing workflow supports custom configuration for fleet buyers.

• We can adjust cargo box plate reinforcement, upgrade sealing packages for humid environments, or tune engine power output, to match your local payload regulations and site terrain, creating a vehicle built for your exact working conditions.

Parameter Table

• Model: Reman Howo 12 Wheel Tipper Truck NX 380
• Cab & Electric: NX modern cab with A/C. Mounting brackets inspected, seals renewed, 24V wiring harness & sensors fully tested
• Engine: Sinotruk WP12 / MC11. Full overhaul, carbon cleaning, worn fuel parts replaced, ECU recalibrated
• Transmission: HW25712 12-speed gearbox. Renewed synchronizers & bearings, bench shift test completed
• Chassis & Axles: 8×4. Dual front steer axles + twin heavy rear drive axles. NDT crack detection, seals renewed, multi-axle geometry calibrated
• Cargo Box: 7200×2350×1500mm NM400 wear-resistant steel. Reinforce high-stress weld zones, anti-corrosion treatment
• Hydraulic System: HYVA front lifting system. Pump, cylinder and seals renewed, repeated full-load lifting cycle test
• Braking System: WABCO dual-circuit air brake. Aging valves & air chambers replaced, full air tightness test
• Suspension & Tires: Fatigued leaf springs and shock absorbers replaced. 12.00R20 heavy-duty tires (12+1 spare)
• Reman Delivery Documents: Parts replacement checklist, chassis crack inspection report, engine bench test log, hydraulic cycle test records

Why Reman Truck Has Better Traceability Than Used Trucks?

• Used or refurbished trucks have no formal rebuild records. You cannot know what parts were replaced or what hidden damage was patched.
• Every REMAN ROAD reman Howo 12 wheel tipper truck comes with a complete rebuild log, including NDT chassis reports, component replacement lists and ECU calibration records.
• This full traceability supports asset management, tender audits and third-party pre-shipment inspection.

Tire Cost Savings Brought by Reman Axle Geometry Calibration

• 8×4 NX dump trucks have 12 tires. Misaligned axles create uneven tire contact, leading to fast, irregular tire wear. Tire replacement becomes a huge recurring expense for fleets.
• During reman, we measure and adjust four axles’ parallelism and load sharing. After calibration, all tires bear balanced load, extending tire service life and cutting annual tire spending significantly.

RFQ

• Q1: How does remanufacturing affect the residual value of HOWO dump trucks?
  A: Chinese reman dump trucks carry complete rebuild records and verified quality. At the end of your project, Chinese reman dump trucks holds much better residual value than ordinary refurbished or unknown used trucks, with smaller depreciation loss during resale.
• Q2: Can reman Howo 12 wheel tipper truck handle muddy, slippery off-road mine roads?
  A: Yes. During reman, we inspect and rebuild the traction system, renew brake components and optimize suspension load balance. The reman Howo 12 wheel tipper truck maintains stable traction and braking performance on slippery muddy ground.
• Q3: What is stress relief treatment on chassis frame, and why is it necessary for truck?
  A: Residual stress accumulates inside the metal frame after years of heavy overload. Stress relief releases that built-up force, preventing slow crack growth under repeated vibration and heavy haul cycles.
• Q4: How do you test the hydraulic unloading system of reman Howo 12 wheel tipper truck?
  A: We run hundreds of full-load lifting and lowering cycles, test valve response, check oil tightness and verify stable movement, to eliminate sudden jolting or stuck unloading.
• Q5: Can we order a spare parts package matched for reman Howo 12 wheel tipper truck for overseas site maintenance?
  A: Yes. We can supply matched consumable kit including filters, brake linings, hydraulic seals and sensor spares to support on-site maintenance in remote mine sites.
• Q6: What will happen if the NX ECU is not recalibrated during reman?
  A: Uncalibrated ECU will lead to poor fuel injection control, unstable power output, higher fuel consumption and frequent false fault alerts during heavy load operation.